There is no product that matches the search criteria.
Your cart is empty.
expert cooling for your gaming rig
Elevate your PC build with the P14 A-RGB 140mm fan from Arctic. Illuminate your PC and add your own style with 12 digital LEDs built-in. You can fully sync the colours with your motherboard to have a synchronized colour scheme. The P14 fan utilises a 0 dB mode, meaning during low-loads it completely turns off for super-silent performance. With a focused airflow and high static pressure, rest assured you'll get the finest cooling performance.
RGB FOR FULL COLOUR CONTROL
The P14 PWM PST A-RGB 0dB has 12 digital A-RGB LEDs. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
0 dB MODE - ZERO RPM
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation when your PC is idle, and at the same time guarantees maximum performance when required.
MAXIMUM SMOOTHNESS, MINIMUM VIBRATION
The operating noise of the newly developed ARCTIC motor can barely be heard, even at the lowest speed. In addition, the P14 PWM PST A-RGB 0dB has rubberised contact surfaces and this works by reducing audible vibrations to a minimum.
OPTIMISED FOR HIGH STATIC PRESSURE
The P14 PWM PST A-RGB 0dB operates with a focused airflow and a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
0 TO 1900 RPM CONTROLLED VIA PWM PST
With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB 0dB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
HIGH QUALITY BEARING
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. This way, less heat develops, less bearing noise is generated and the longevity of the fan is extended.
English