There is no product that matches the search criteria.
Your cart is empty.
EK-Quantum Vector XC3 3080/3090 D-RGB water block is compatible with EVGA XC3 RTX 3080 and 3090 graphics cards. The Vector water block actively cools the GPU, VRAM (on the front), MOSFETs, and chokes in the VRM (voltage regulation module). The water block contacts every single inductor in the VRM area to suppress any potential coil whine. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channelled right over these critical areas. The water block is in contact with MOSFETs and chokes to maximise cooling and minimise the chances of coil whine.
These newly developed water blocks feature optimised flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. Additionally, this new design allows the terminal to be screwed directly onto the copper cold plate of the GPU block, making it more rigid and reducing the chances of damaging the water block.The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterised by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimised to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation.Fin array is populated by 27 microfins with 0.5mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards.
The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals that match the top cover. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.
The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block boasts a total of 12 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.
EK recommends the purchase of a retention backplate, especially for the 3090 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM on the 3090 cards, and backside of the printed circuit board VRM section.
Contents Include:• EK-Quantum Vector XC3 RTX 3080/3090 D-RGB series high-performance water block.• Mounting mechanism with screw-in brass standoffs.• Necessary mounting screws, nuts, and washers.• 2x Nickel plated brass plug G1/4”.• EK-Loop Multi Allen Key (6mm, 8mm, 9mm).• Thermal pads.• Thermal grease EK-TIM Ectotherm (1g).Please Note:• Due to the immense variety of fittings/barbs available on the market, we guarantee compatibility only with EK fittings.• Factory backplates are not compatible with this water block!• Check your toolbox if you are missing the special Hex adapter for some of the screws.• This product should NOT be installed with any aluminium Fluid Gaming parts!• The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block!
